Projects
Projects: Projects for Investigator |
||
| Reference Number | NIA_WWU_007 | |
| Title | Iron Mains Condition Assessment System Phase 3a | |
| Status | Completed | |
| Energy Categories | Fossil Fuels: Oil Gas and Coal(Oil and Gas, Refining, transport and storage of oil and gas) 100%; | |
| Research Types | Applied Research and Development 100% | |
| Science and Technology Fields | PHYSICAL SCIENCES AND MATHEMATICS (Metallurgy and Materials) 50%; ENGINEERING AND TECHNOLOGY (Mechanical, Aeronautical and Manufacturing Engineering) 50%; |
|
| UKERC Cross Cutting Characterisation | Not Cross-cutting 100% | |
| Principal Investigator |
Project Contact No email address given Cadent Gas |
|
| Award Type | Network Innovation Allowance | |
| Funding Source | Ofgem | |
| Start Date | 01 December 2013 | |
| End Date | 01 February 2014 | |
| Duration | 2 months | |
| Total Grant Value | £89,244 | |
| Industrial Sectors | Technical Consultancy | |
| Region | London | |
| Programme | Network Innovation Allowance | |
| Investigators | Principal Investigator | Project Contact , Cadent Gas (99.999%) |
| Other Investigator | Project Contact , Wales and West Utilities (0.001%) |
|
| Web Site | http://www.smarternetworks.org/project/NIA_WWU_007 |
|
| Objectives | This phase of the project will identify the level of strain at which cast iron mains can be expected to fail and confirm the tools ability to detect this. Furthermore, it will identify & develop the options for entering the tool into the mains and traversing within the main. Demonstrate the conditions at which cast iron pipe failure occurs & ability of the tool to detect these. A report detailing the options for entering and traversing along the mains | |
| Abstract | Today’s gas distribution networks have been built up and developed from networks that date back over 100 years. For much of this time the material of choice for the manufacture of distribution mains was cast iron (either pit or centrifugally (spun) cast). As a result, there is a significant volume of this legacy cast iron remaining in these networks that are still being utilised for the conveyance of natural gas. Cast iron is prone to corrosion and also, being an inherently brittle material, sudden catastrophic failure through fracture. When such failures do occur there is a sudden and uncontrolled release of gas, each of these failures, depending on the proximity, has the potential to cause gas to enter into a building whereby it can form a hazardous or explosive atmosphere endangering the consumer and general public. Through this project Wales & West Utilities and National Grid are looking to take a proactive approach to understanding the actual condition of these mains, rather than to continue to rely on the reactive indicators used until now. This is to ensure the continued security of supply and safety of the consumer and general public under the new Iron Mains Risk Reduction Programme. This project is looking to develop a tool that will travel for extended lengths within tier 2 and 3 mains (9" and above) to determine their condition. This will be done by measuring corrosion depth / wall thickness on the inside and outside walls as well as the actual strain present in the pipe wall. Knowledge of the asset condition, as determined from both the level of corrosion (loss in wall thickness) and strain in the pipe wall, will allow GDNs to: accurately determine the risk these main pose to the public and the network, predict remaining life of the asset to a level of accuracy not previously possible allow for targeted, informed and innovative interventions to be undertaken in the most cost efficient manner This project builds upon the initial development phases undertaken firstly through IFI and completed under the NIA registered project NIA_WWU003. This project focuses on the adaptation of a specific Electro Magnetic Inspection (EMI) Versatile Array Technology into a tool to condition assess cast iron mains through the detection of corrosion and / or defects as well as the detection of induced strain within the main. This project is comprised of a number of distinct stage gated phases to adapt and further develop an existing commercial product originally developed for the nuclear industry. The phases are intended to take the technology from a desktop demonstration to a complete tool /system for the survey and condition assessment of extended lengths of cast iron mains (principally focused on tier 2 mains with a view to extending the technology to tier 3 as appropriate). An overview of the Phases involved in this development are detailed below: - Phase 1: Development of technology from desktop demonstration into a basic prototype as a proof of concept; trialled and demonstrated in an 80 m section of abandoned 10" SI main. (COMPLETED under IFI)- Phase 2: Development of proof of concept prototype into a full scale prototype with additional sensors and increased sensitivity for greater wall coverage / accuracy, increased survey speed and improved data processing. Trialled and demonstrated in 200 m section abandoned 12" SI. (COMPLETED IFI and NIA_WWU003)- Phase 3a: i) Investigate the level of strain the toolwill need to identify in a main for such strain to be cause for concern, through destructive testing of representative samples. ii) Conduct feasibility study to investigate options for inserting and extracting tool in and out of the mains to be surveyed.- Phase 3: Develop the tool from the extended prototype of Phase 2 to a full scale prototype system including live entry solution. To be tested and demonstrated on a live tier 2 main, yet to be determined.- Phase 4: Adaptation of prototype system into production version. Roll out and implementation of system. (not included in project cost)Note : Project Documents may be available via the ENA Smarter Networks Portal using the Website link above | |
| Publications | (none) |
|
| Final Report | (none) |
|
| Added to Database | 31/08/18 | |
